Acromark | Machines

Acromark Hot Stamping Press Vertical Series 800

Model 830 To view full specifications of the Acromark Hot Stamping Press Series 830, please click below: Acromark Hot Stamping Press Series 830 Sellsheet High-strength steel plate construction High/Low, Air/Oil power system Point-of-contact, high-pressure activation Depth-stop stroke adjustment Linear rod head guidance Choice of heated head sizes Adjustable leveling head feature Motorized foil feeds with automatic scrap rewind Fixed knee or adjustable raising table configurations Adjustable from ½ to 10 tons of pressure User-friendly, all-in-one graphic controller with touch screen controls Dual electric safety hand switch actuation with anti-tie down, anti-pinch point circuitry

Each press comes with a rugged modular steel plate frame permitting an unlimited variety of frame configurations to suit every product need. The Series 830 presses operate with a direct acting, air/oil power system, developing a controlled marking pressure of anywhere from 1/2 to 10 tons with point contact high pressure activation. Both the four- and six-inch stroke cylinders preclude the need for fine adjustments to the support table during set up and automatically compensate for part thickness variations. Vertical clearance adjustments are made on raising table models by means of a heavy threaded center screw and for adjustable outboard supports. Dual electric hand switches with anti-tie down, anti-pinch point safety circuitry are standard. There are four standard heated head sizes, while special requirements are met upon request. All heads are suspended on a four post ram guidance assembly with a hardened and ground steel shafts moving through two levels of bearings for precision stamping accuracy. All heads have an adjustable leveling provision for ease in set-ups. A process controller with touch screen controls and motorized foil feed with automatic scrap foil rewind is standard. Among available options are receding foil guides, adjustable delayed foil strap circuitry, and preprinted Heat Transfer/Digital Heat Transfers feed systems with electric eye registration.

Model 830E-200

• High strength steel plate construction
• Extended vertical and horizontal clearances available
• High/Low, Air/Oil power system
• Point of contact high pressure activation
• Depth stop stroke adjustment
• Linear rod head guidance
• Choice of heated head sizes
• Adjustable leveling head feature
• Motorized foil feeds with automatic scrap rewind
• Separate power switches for heated head and press
• Fixed knee or adjustable raising table configurations

The Series 800 C-frame Presses are available with maximum rated capacities ranging from 10 to 20 tons. They are capable of handling the widest range of part sizes and production requirements of any machine in the market.

Each press comes with a rugged modular steel plate frame permitting an unlimited variety of frame configurations to suit every product need. The Series 800 presses operate with a direct acting, air/oil power system, developing a controlled marking pressure of anywhere from 1/2 to 20 tons with point contact high pressure activation. Both the four and six inch stroke cylinders preclude the need for fine adjustments to the support table during set up and automatically compensate for part thickness variations. Vertical clearance adjustments are made on raising table models by means of a heavy threaded center screw and for adjustable outboard supports.

Dual electric hand switches with anti-tie down, anti-pinch point safety circuitry are standard. There are four standard heated head sizes while special requirements are met upon request. All heads are suspended on a four post ram guidance assembly with a hardened and ground steel shafts moving through two levels of bearings for precision stamping accuracy. All heads have an adjustable leveling provision for ease in set-ups. A process controller with solid state temperature control and motorized foil feed with automatic scrap foil rewind is standard. Among available options are receding foil guides, adjustable delayed foil strap circuitry, and preprinted Heat Transfer/Digital Heat Transfers feed systems with electric eye registration.

All Series 800 presses can be equipped with rotary index table assemblies, slide tables, or automatic part feeders and ejection systems, for increased productivity in your hot stamp operation. The Series 800 presses offer a full range capability, from delicate tipping to full pressure imprinting, and are ideal systems for all your requirements in hot stamp decorating.

Model 830-150 Acromark Model 830-150, 10-ton press with a precision rotary indexer shown with three stations of tooling. Capable of marking in excess of 1,800 parts per hour with manual loading and unloading of parts. Addition if automatic loading and unloading is available as an option.

Model 850-100

Acromark's Model 850-100 is a 20-ton press with a fixed knee-style frame designed to mark large molded crates (up to 64 cubic feet) with either flat stamp image dies or interchange automatic numbering heads. Special style frames and tooling are available for marking beverage crates, recycling containers, and curbside trash containers.

Acromark Hot Stamping Press Roll-On Series 700

High Speed Linear Contact Roll-On

To view full specifications of the Acromark Hot Stamping Press Roll-On Series 700, please click below:

Acromark Hot Stamping Press Roll-On Series 700 Sellsheet (Front)

Acromark Hot Stamping Press Roll-On Series 700 Sellsheet (Back)

Model 720RC-8

• For high speed roll-on operation
• Conveyor belt or pallet drive
• Up to 48in. application roller width
• Articulated roller head assembly
• External ceramic heating system
• Safety head retract and anti-rotational air cool down
• Stand-off control center
• DC electric variable speed motor control
• Solid state electronic temperature control and infrared thermocouple sensing
• Separate system and temperature control power switches
• Auxiliary control features

The Acromark Model 720 RC Roller Coated is a versatile linear contact roll-on hot stamping machine designed for high speed decorating. The machine is used for tipping the raised portions of molded characters, designs or beads and for applying various types of hot stamping foils or multi-color preprint Heat Transfer/Digital Heat Transfers designs to large flat area parts and panels. The roll-on hot stamp transfer is accomplished by rotational line contact of a heated silicone roller against the surface of the part being decorated. This method provides compensation for surface variations and it also eliminates air entrapment occurring in vertical press stamping of larger area parts.

The standard machine is equipped with a variable speed conveyor belt drive permitting the continuous feeding of parts and material. Self supporting items are placed directly on the belt but the machine is also suited to certain applications where fixturing is required to support a shaped part. For other fixed applications the machine is available with a palletized chain conveyor on which individual parts support nest are mounted. In many cases multiple passing of parts and automatic feed out is possible thereby further increasing production yield.

The external ceramic heating system is regulated at the roller surface through solid state temperature control and an infrared thermocouple. Foil is automatically fed with the advance system being directly tied into the roller and conveyor drive motor. The roller head has dual pressure spring loading to allow floating of the head assembly for compensation of certain part thickness variations. An air retract lifts the roller assembly away from the work and drive conveyor when the equipment is in the idle or warm up stage. This retract is also activated as a pinch point safety provision on contact of an electrically sensing bumper bar. Air safety cool down of the roller is provided in the event of electric power failure or shut-off. The separate, free standing control center may be positioned for best operator access.

Model 730RT

Applying the same principles as the linear Model 720RC, this machine is used where part fixturing is required in applying hot stamp foils. The Model 730RT is custom built to meet a wide variety of requirements from air conditioner grills to TV cabinets. The selection of sizes for heated rollers and moving tables is virtually unlimited, permitting Acromark to produce the best machine for your application. The Model 730RT can be provided with a floating head option to facilitate application of hot stamp foils to contoured surfaces as well.

Model 730RR Hot stamping peripheral parts at high speeds is achieved with the Acromark Model 730RR. Both banding with standard foils or full surface application of preprinted Heat Transfer/Digital Heat Transferss around the periphery of cylindrical parts can be achieved with the Model 730RR. This pres is available designed for single station fixturing or with single or double sided rotary tables. Output speeds can reach 70 parts per minute with the double sided rotary Model 730RR.

Model 730P

Designed for hot stamping on extruded parts, the Model 730P can apply both standard foils and continuous pattern preprinted Heat Transfer/Digital Heat Transferss on either precut parts or on-line with a plastic extruder. This press is available with a variety of heated roller sizes and mounting configurations to make this an ideal machine for continuous extrusion hot stamping. For multiple surface decorating, several Model 730Ps can be mounted sequentially to decorate the part in a single operation.

Acromark Hot Stamping Press Vertical Series 500

The Ultimate Press For Precision Hot Stamping

To view full specifications of the Acromark Hot Stamping Press Vertical Series 500, please click below:

Acromark Hot Stamping Press Vertical Series 500 Sellsheet

Model 530-20

• Rugged welded steel frame construction
• Heavy duty double acting direct air power cylinder
• Dual hardened steel shaft and linear bearing precision head guiding
• Adjustable stroke cylinder depth stop
• Simplified manual head set up feature
• Motorized foil feed system with scrap rewind and time saver foil load provision
• Separate power switches for heater system and pres with predetermining auto shut off counter
• Rigid work base with adjustable head elevating mechanism
• Dual electric safety hand switch actuation with anti-tie down, anti-pinch point circuitry

The 500 Series is Acromark's superior performance, heavy duty Hot Stamping Press. It utilizes a sturdy welded steel frame construction and is powered by a double acting J.I.C. standard direct air cylinder with adjustable stroke depth stop. Precision head guiding is obtained with a dual hardened steel shaft and linear bearing ram assembly. Programmable logic controller with solid state temperature control and dual anti-tie down hand operating controls with anti-pinch point circuitry are standard.

Applications for the 500 Series include all types of parts from dials and gauges for automotive and electronic items to decorative applications for the cosmetic, toy and appliance industry.

An excellent machine for long and short production runs alike, the presses can be equipped with auxiliary work feeders, air inflation mechanisms for blown bottle stamping, delayed action foil stripping and systems for electric eye indexing of preprinted Heat Transfer/Digital Heat Transfers. This is the ultimate hot stamping press for any decorating department.

Model 590 To view full specifications of the Acromark Hot Stamping Press Series 590, please click below: Acromark Hot Stamping Press Series 590 Sellsheet Rugged, welded steel-frame construction Heavy-duty, double-acting, direct air power cylinder, 2½ tons Dual hardened steel shaft and linear-bearing precision head guiding Adjustable stroke-cylinder depth stop Simplified, manual head set up feature Motorized foil feed system with scrap rewind and time saver foil load provision User-friendly, all-in-one graphic controller with touch-screen controls Rigid work base with adjustable head-elevating mechanism Dual electric safety hand switch actuation with anti-tie down, anti-pinch point circuitry Optional tubular steel floor stand

Applications for the 590 Series include all types of parts from dials and gauges for automotive and electronic items to decorative applications for the cosmetic, toy and appliance industry. An excellent machine for long and short production runs alike, the presses can be equipped with auxiliary work feeders, air inflation mechanisms for blown-bottle stamping, rotary indexers, delayed action foil stripping and systems for electric eye indexing of preprinted Heat Transfer/Digital Heat Transfers. This is the ultimate hot stamping press for any decorating department.